Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
The Pipe Supports Blog

Two 16 Dia. HD-2 Hold Down Clamps for an Oil Refinery

April 16th, 2004 No comments
Two 16 Dia. HD-2 Hold Down Clamps for an Oil Refinery

Two 16 Dia. HD-2 Hold Down Clamps for an Oil Refinery

Piping Technology and Products, Inc. recently designed and manufactured two HD-2 hold down clamps to fit a 16 pipe at an oil refinery in Michigan.  These hold down clamps are designed to be used on pipe lines where there is a high temperature and great thermal movement requirements. They allow axial movement while restraining lateral movement. The clamp and base plate are fabricated from carbon steel with PTFE, 25% glass filled, bonded to the radius and plate.

Do you see a need for hold down clamps in your piping system? Get pricing today!
request-a-quote


90,000 lb. Load Big Ton Springs for a Chemical Plant

April 9th, 2004 No comments

90,000 lb. Load Big Ton Springs for a Chemical Plant

90,000 lb. Load Big Ton Springs for a Chemical Plant

90,000 lb. Load Big Ton Springs for a Chemical Plant

Name Plate Indicates Hot/Cold Loads

Piping Technology and Products, Inc. manufactured four 13,500 lb. Big Tons Springs for a chemical plant in Texas. These PTP-500 Big Ton Springs have a load capacity of 60,000 to 90,000 lb. are fabricated from A-36 carbon steel. They are designed for 750°F and a downward travel range of 3/16″ to 1/4″. These 37″ x 31″ x 30″ Big Tons will be used to support certain critical equipment with thermal expansion at the chemical plant. To assure quality, load testing was performed on the big tons prior to shipping.

Do you require big ton springs in your current or future job? Get pricing today!
request-a-quote


April 2004 News

April 4th, 2004 No comments

Updated Version of PHDS Download
Pipe Hanger Design Software (PHDS) is an easy-to-use program that allows you to easily generate CAD drawings of PT&P’s variables, constants, and rod hanger supports together with a complete bill of material. You may also send the drawings to info@pipingtech.com or 1+713-731-8640 (fax) for an immediate quote.

PHDS Software

Software Features

  • Generate 2D drawings of variable, constant, and rod hanger pipe supports from a large selection of pre-defined assemblies Save drawings as .dwg filesUse an Excel datasheet to generate drawings in batch mode Add a location plan to the drawings in PHDS or through the Excel datasheetGenerate drawings in either FPS, Metric, or SI units
  • Use a built-in function to submit drawing data to PT&P for quotation

13,900 lb. Load Pipe Shoes and Bronzphite® Slide Plate

April 2nd, 2004 No comments
13,900 lb. Load Pipe Shoes and Bronzphite® Slide Plate

13,900 lb. Load Pipe Shoes and Bronzphite® Slide Plate

Piping Technology and Products, Inc. recently designed and fabricated more than 75 pipe shoe and Bronzphite® slide plate assemblies for an oil refinery in Texas. Each assembly consists of two pipe clamps, a base plate and a maintenance free Bronzphite® slide plate. The pipe shoes with sizes ranging from 18 to 24 are fabricated from A387 alloy steel. They are designed for 965°F and 2 of horizontal movement.

The 3 x 3 Bronzphite® (graphite impregnated bronze) slide plates are self-lubricating bearing plates made of a high quality bronze with graphite filled grooves. They are designed for heavy loads, low velocity applications, and for situations where the use of oil or grease is undesirable or unfeasible.

Do you require pipe shoes or slide plates in your piping system? Let us price them for you today!
request-a-quote


Categories: Slide Plates Tags: ,

950 lb. Load PTP- 6 Type F Variable Springs for an Offshore Oil Rig

March 19th, 2004 No comments
950 lb. Load PTP- 6 Type F Variable Springs for an Offshore Oil Rig

950 lb. Load PTP- 6 Type F Variable Springs for an Offshore Oil Rig

Piping Technology and Products, Inc. recently designed and fabricated two 950 lb. load PTP-6 type F size 90 variable springs for an offshore oil rig.  These variable springs have an overall height of 33 1/2″ and are designed for a travel range of 4″. Each variable consists of an 8 5/8″ dia. casing, a 13″ square base plate, an 8″ load flange and three spring coils with a 7 1/2″ working range. All components are fabricated from carbon steel and are hot-dipped galvanized.

Want to learn more about variable springs? Instantly view a past variable webinar!


access-our-webinar-archives



230 lb. Double Cable Clamp for an Oil Refinery

March 12th, 2004 No comments
230 lb. Double Cable Clamp for an Oil Refinery

230 lb. Double Cable Clamp for an Oil Refinery

Piping Technology and Products, Inc. recently fabricated a 230 lb. double cable clamp assembly for an oil refinery in Kentucky. This cable clamp assembly, fabricated from 304 stainless steel, consists of a double clamp, a steel support structural, and a base plate. The double cable clamp with an overall dimension of 22 x 12 x 6 is designed for a 2.4 and a 3.8 dia. armored cable.

Want to learn more about pipe clamps? Instantly view a past pipe clamp webinar!


access-our-webinar-archives



49,000 lb. Load Constant Springs for a Power Plant

March 5th, 2004 No comments

49,000 lb. Load Constant Springs for a Power Plant

49,000 lb. Load Constant Springs for a Power Plant

Piping Technology and Products, Inc. custom designed and manufactured four double lug suspension PTP 100-C size 84 constants for a power plant in South Carolina.  These constants are designed for a vertical travel range of 5″ and an operating load capacity of 49,000 lb. They are fabricated out of A36 carbon steel and weigh 2,900 lb. each. Prior to shipping standard load and travel tests were performed on these 20″x 35″x 80″ constants to ensure quality.

Do you see a need for constant springs in your piping system? Get pricing today!
request-a-quote


24,500 lb. Load PTP- 8 Type C Variable Spring Assemblies

February 26th, 2004 No comments

 

24,500 lb. Load PTP- 8 Type C Variable Spring Assemblies

24,500 lb. Load PTP- 8 Type C Variable Spring Assemblies

Piping Technology and Products, Inc. designed and manufactured four PTP-8 Type C variable spring assemblies for a power plant in South Carolina.  These variable spring assemblies with an average overall length of 87″ are fabricated from carbon steel. Each pipe hanger assembly consists of a variable spring, a rod, a clevis and hex nuts. The springs are designed for operating loads ranging from 22,500 lb. to 24,500 lb. and a total travel of 5″. For quality assurance, the spring coils are inspected and tested individually for proper operation.

Want to learn more about variable springs? Instantly view a variable spring webinar today!


access-our-webinar-archives



12,500 lb. Load Hydraulic Snubber and 24 Alloy Clamp Assembly

February 20th, 2004 No comments
12,500 lb. Load Hydraulic Snubber and 24 Alloy Clamp Assembly

12,500 lb. Load Hydraulic Snubber and 24 Alloy Clamp Assembly

Piping Technology and Products, Inc. recently designed and manufactured a PTP Fig. 2100 Hydraulic Snubber and a Clamp Assembly for a power plant in California. The Hydraulic Snubber with a cylinder size of 2 1/2 dia. and a stroke of 5 is designed to support an operating load of 12,500 lbs. The 24 alloy clamp is designed to accommodate a temperature of 1078°F. The entire pipe hanger assembly was hydraulic tested prior to shipping.

Do you have a need for hydraulic snubbers? Let us price them for you today!
request-a-quote


Flexible Pipe Restraints for an Oil Refinery

February 13th, 2004 No comments
Flexible Pipe Restraints for an Oil Refinery

Flexible Pipe Restraints for an Oil Refinery

Piping Technology and Products, Inc. designed and manufactured six flexible pipe restraints for an oil refinery in Texas.  These flexible pipe restraints, with the overall length ranging from 14″ to 30″, are designed to restrain movements of the piping system. They are manufactured by welding a 2 1/2″ SCH.80 galvanized casing pipe between 2×2 1/2″ flexible ball joints. Some also have a 2″ SCH. 80 pipe end welded to the swivel stem of the ball joints for length adjustments during installation.

Do you have a need for flexible pipe restraints like those described above? Get pricing now!
request-a-quote


Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy