Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
Constant Spring Support — The Pipe Supports Blog

PT&P Engineering and Design

March 28th, 2017 Comments off

Constant Spring Supports Product Video

May 9th, 2016 Comments off

U-Type Constant Spring Supports Designed for an LNG Plant in Canada

May 6th, 2016 Comments off

U-Type Constant Spring Supports Designed for an LNG Plant in Canada

PT&P designed U-Type constant spring supports for an LNG plant in Canada. These are horizontal constants designed to support piping from below where the base plate is bolted directly to the top of the steel or the foundation using anchor bolts. These specific constant springs are designed to support an operating load of 67,420 lb. with 6” of total upwards travel. The constants are fabricated from galvanized carbon steel for protection against corrosion. Standard load and travel testing were completed to ensure the quality and performance of these constants.

G-Type Constant Spring Support, 96″ Long by 40″ High, Designed to Support a 12,818 lb. Load

February 10th, 2013 Comments off

G-Type Constant Spring Support, 96" Long by 40" High, Designed to Support a 12,818 lb. Load
This PTP-100 Type-G constant spring support is 96″ long by 40″ high and will support a 12,818 lb. load. It has an actual travel of 0.3″ and total travel of 1-1/2″. The G-type constant is comprised of two standard constant spring housing sub-assemblies joined together with an intermediate bridge assembly. The bridge assembly is customized to handle up to 26,000 lb. of hydro load. The G-type assembly allows for use in applications with limited space. Special identification tags were installed in addition to PT&P’s standard name plates per the customer’s request. Standard testing was performed and witnessed by an outside inspector prior to shipment.

200 E-Type Constant Spring and 3-bolt Pipe Clamp Assembly for a Power Plant in South Carolina

November 15th, 2010 No comments

200 E-Type Constant Spring and 3-bolt Pipe Clamp Assembly

This 200 E-Type horizontal constant spring support is fabricated from carbon steel with a
hot-dipped galvanize finish. It is designed for a 54,020 lb. load with a total travel of 15.5″. The 3-bolt pipe clamp is designed for a 26″ diameter pipe and is coated with a red oxide primer. Each pipe hanger assembly went through standard load and travel testing prior to shipping. PT&P will design and fabricate any size constant spring support in addition to the sizes listed in our catalog.

Want to learn more about spring supports or clamps? Instantly view a past webinar now!
access-our-webinar-archives

Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy