Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
pipe hanger — The Pipe Supports Blog

March 2006 News

March 4th, 2006 No comments

Piping Technology & Products, Inc. Performed Field Services for a Power Generating Plant in Texas

PT&P was contracted to assist in the determination of pipe support maintenance at a power plant in Texas. The constant effort support springs with loads of excess of 9,500 lbs and the variable spring supports with loads of 450 lbs were marked for needing attention.

Inspecting Variable Springs for Performance

Cleaning Variable Spring Unit

Inspecting Variable Springs for Performance

Inspecting Variable Springs for Performance

PT&P’s objectives were to:

* Evaluate the pipe supports
* Determine state of performance
* Provide a plan of action
* Train personnel on-site to perform adjustments and replacement of supports or support components
* Provide final inspection of modified supports

After Cleaning & Preparation of the Constant

After Cleaning & Preparation of the Constant

Final Assembly with Added Slide Plates

Final Assembly with Added Slide Plates

The pipe supports needing attention could not be set to the required installation position. A plan was initiated to recondition some of the support components such as turnbuckles and rods. This would allow a greater range of field adjustment to the pipe supports. During a planned shut-down, PT&P Field Service Units returned to the site to modify the existing supports. The initial phase of the modifications included bracing the piping in order to isolate and lock the supports in position. Then, they were disconnected from the system and modifications to the assemblies were completed. Afterwards, the supports were reinstalled and any necessary adjustments were completed. A total of eight pipe supports were modified or adjusted.

Roller Bearing Needing Maintenance

Roller Bearing Needing Maintenance

Restored Roller Bearing

Restored Roller Bearing

Do you see a need for a routine inspection of your plant? Contact us for a quote today!
request-a-quote


Upthrust 200-U Type Constants for an Oil Refinery

February 28th, 2006 No comments

 

Upthrust 200-U Type Constants for an Oil Refinery

Upthrust 200-U Type Constants for an Oil Refinery

Upthrust 200-U Type Constants for an Oil Refinery

Upthrust 200-U Type Constants for an Oil Refinery

The upthrust constants (PTP Fig. 200-U) were fabricated from A36 carbon steel. Weighing at 4,150 lbs each, they measure 94” long, 27” wide, and 43” tall. They support loads from 90,700 lbs to 93,000 lbs with 4” of vertical travel. In addition, they are custom designed with extra supporting points for heavier loads. They are used to support the piping system from beneath the pipeline. Upthrust constants only allow for vertical travel and are used where horizontal travel is unacceptable. Standard load and travel testing was completed to assure quality and performance.

Do you require u-type constants in your plant or refinery? Let us price them for you now!
request-a-quote


88 Constant Supports for a Hydrogen Reformer Plant

January 4th, 2006 No comments
 88 Constant Supports for a Hydrogen Reformer Plant

88 Constant Supports for a Hydrogen Reformer Plant

These Figure PTP100-A size 40 and 51 constant supports, made of A36 carbon steel, are used to support pipeline systems. Each is 24″ long, 10 1/2″ wide, and 51 1/2″ high. These constants are capable of supporting loads ranging from 1,165 lb. to 2,260 lb. with a travel range of 13″ to 14 1/2″. PT&P specifically designed and fabricated each constant for specific dimensions provided by the customer. Standard load and travel testing was completed for quality assurance.

Do you require constants in your plant or refinery? Let us price them for you today!
request-a-quote


Constant Hanger Supports for a Power Recovery Plant

December 7th, 2005 No comments

 

Constant Hanger Supports for a Power Recovery Plant

Constant Hanger Supports for a Power Recovery Plant

Constant support hangers are used to support pipes subjected to vertical movement. The (Fig. PTP 200) constants are designed to support loads from 4,000 lbs to 57,000 lbs. Each weighs approximately 1,500 lbs to 2500 lbs and has a travel of up to 4″ with an adjustable travel stop. Their sizes range from 15 to 100.

The advantage of an adjustable travel stop is that the constant is able to “lock in” at any position within the range of travel for a given constant. This alleviates the need for a total “shut down” of the piping system for temporary conditions such as hydrotesting, repair, or replacement.

Want to learn more about constants? Instantly view a past constant webinar today!


access-our-webinar-archives



Constants for an Oil Refinery in Texas

November 16th, 2005 No comments
Constants for an Oil Refinery in Texas

Constants for an Oil Refinery in Texas

These constant hanger assemblies are used to support piping systems subjected to vertical movement. They are capable of supporting loads ranging from 3,000 lbs to 63,000 lbs with a travel range of 5″. They have dimension between 73″ long, 36″ tall, and 23″ wide to 80″ long, 27″ tall, and 12 3/4 ” wide. Standard testing was performed for quality assurance.

Constants for an Oil Refinery in Texas

Constants for an Oil Refinery in Texas

Do you see a need for constant supports in your refinery? Let us price them for you today!
request-a-quote


Constant Hangers for an Engineering Company

November 2nd, 2005 No comments
Constant Hangers for an Engineering Company

Constant Hangers for an Engineering Company

Constant hangers provide constant support for pipes subject to vertical movement due to thermal expansion. These Type E Constant Hangers are made from carbon steel ranging from 5 to 7 in length. Their applicable loads range from 17,300 lbs to 30,000 lbs. The total travel ranges from 2 to 9 . Standard constant load testing was performed for quality assurance per customers request.

Do you require constant hangers for your current project? Get pricing today!
request-a-quote


200-C Constant Supports for a Power Plant

October 5th, 2005 No comments
200-C Constant Supports for a Power Plant

200-C Constant Supports for a Power Plant

These PTP-200 type C constants measure 23″ x 64″. are designed for an operating capacity of 14,400 lbs and a travel range of 4″. The constants are made of A36 carbon steel and weigh 1,770 lbs each. They have been modified to accommodate a specialized spring coil and have a modified casing. Standard load and travel testing were performed prior to shipping to ensure quality.

Do you see a need for constant spring supports in your piping system? Get pricing now!
request-a-quote


PTP 1-140 Type F Positive Variable Springs for a Power Plant

September 21st, 2005 No comments
PTP 1-140 Type F Positive Variable Springs for a Power Plant

PTP 1-140 Type F Positive Variable Springs for a Power Plant

 

PTP 1-140 Type F Positive Variable Springs for a Power Plant

Rows of Variable Springs on Shipping Floor

All of the custom designed variables consist of a single flange with two spring supports in order to meet the customer’s height restrictions. These PTP1-140 Type F variable springs are fabricated from A36 carbon steel with an overall weight of 16,900 lbs. They are designed for upward movement of 0.079″ with a hot load of 4,490 lbs., and a cold load of 4,620 lbs.

Want to learn more about variable springs? View a past variable spring webinar now!




access-our-webinar-archives



Constants for an Energy Plant in Iowa

July 29th, 2005 No comments
Constants for an Energy Plant in Iowa

Constants for an Energy Plant in Iowa

This (PTP-13) size horizontal E-type constant is for an energy plant in Iowa. It measures 14″ 9″ 24″ with a total travel range of 5″ and an operating load of 388 lbs. It is fabricated out of A36 carbon steel, and weighs 95 lbs. Standard load and travel testing were performed on the constant prior to shipping to ensure quality.

Do you require constants for your current job? Get pricing today!


request-a-quote


Constants for Energy Plant in Louisiana

July 1st, 2005 No comments
Constants for Energy Plant in Louisiana

Constants for Energy Plant in Louisiana

Piping Technology & Products, Inc. custom designed and manufactured Type 200-C constant springboxes for an energy plant in Louisiana.

The constant measures 23 x 40 designed for an operating load capacity of 8,300 lbs. and a total travel range of 8. The constant is fabricated of A36 carbon steel. To ensure quality,
standard load and travel tests were performed prior to shipping.

Do you see a need for constant spring supports in your piping system? Get pricing today!
request-a-quote


Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy