Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
pipe hanger — The Pipe Supports Blog

46 Constants for Hydrogen Reformer

November 26th, 2004 No comments
46 Constants for Hydrogen Reformer

46 Constants for Hydrogen Reformer

Piping Technology & Products, Inc. custom designed and manufactured 46 PTP 100-C size 50 constants for a hydrogen reformer in Chile. The constants measure 30 x 48, designed for a vertical travel range of 11 and an operating load capacity of 2,600 lbs. They are fabricated out of A36 carbon steel. To ensure quality, standard load and travel tests were performed prior to shipping.

Want to learn more about constants? Instantly view a constant webinar now!




access-our-webinar-archives



70,000 lb. Load Constants for Power Plant

October 29th, 2004 No comments
70,000 lb. Load Constants for Power Plant

70,000 lb. Load Constants for Power Plant

These constants are designed for a vertical travel range of 8.5 and an operating load capacity of 70,000 lbs. They are fabricated out of A36 carbon steel with dimensions of 45×80. Prior to shipping, standard load and travel tests were performed to ensure product quality.

Do you require constant springs in your piping system? Let us price them for you now!
request-a-quote


Custom Variable Springs for Power Plant

October 8th, 2004 No comments
Custom Variable Springs for Power Plant

Custom Variable Springs for Power Plant

Custom Variable Springs for Power Plant

Rod & Clevis Assemblies

Piping Technology and Products, Inc. custom designed and manufactured variable springs to be used in conjunction with a rod and clevis assembly for a power plant in West Virginia.  Since the operating loads specified by the customer were greater than the maximum loads for the largest PT&P spring, custom units needed to be built for this application. The springs were fabricated using a large spring coil, normally only used in constant spring assemblies. The spring is 20 1/2″ in diameter and has a standing height of 51″. All components of the pipe hanger assembly were made from carbon steel and were supplied with a hot-dipped galvanized finish. The spring is 20 1/2″ in diameter and has a standing height of 51″.  The rods will be attached to type A variable springs designed to support loads from 850 lbs. to 13,300 lbs. Manufactured from A-36 carbon steel, the rods are 3/4″ to 2″ in diameter and range in length from 68″ to 95″.

To prevent contamination at high temperatures, a non-galvanized finish was applied to the rods per customer’s request. Prior to delivery, a 100% dye-penetrant test was preformed to ensure quality.  The variable springs were tested in the load cell to insure proper operation and also to set the cold load to the specifications as provided by the customer.

Want to learn more about variable springs? Instantly view a past variable webinar!


access-our-webinar-archives



Constants for an Oil Refinery in Texas

September 17th, 2004 No comments
Constants for an Oil Refinery in Texas

Constants for an Oil Refinery in Texas

Constants for an Oil Refinery in Texas

PTP-100 Type B

Piping Technology & Products, Inc. recently fabricated 48 PTP-200 type U and 54 PTP-100 type B constants for an oil refinery in Texas.  The PTP 200 type U with base support constants are designed for operating loads ranging from 650 lbs. to 7700 lbs. and a travel range of 3″ to 4″. They are fabricated out of A36 carbon steel with dimensions ranging from 15″x22″ to 27″x38″. The PTP 100 type B constants are fabricated from A36 carbon steel with dimensions ranging from 11.5″x23″ to 12″x29″ and total travel of 3″ to 4″. These constants are designed for operation loads ranging from 1100 lbs. to 2800 lbs.  Space restrictions required a customized compact design. Standard load testing was performed to ensure product quality prior to shipping.

Do you require constant supports for your piping system? Let us price them for you today!
request-a-quote


Constants for Operating Loads of up to 25,000 lbs

August 13th, 2004 No comments
Constants for Operating Loads of up to 25,000 lbs

PTP-100 Type U

Constants for Operating Loads of up to 25,000 lbs

Constants for Operating Loads of up to 25,000 lbs

Piping Technology & Products, Inc. custom designed and fabricated PTP-100 type U and PTP-100 type A constants.  The PTP-100 type U constants are designed for operating loads of up to 17,000 lbs. and a travel range of 3.5″. They are fabricated from A36 carbon steel with dimensions of 32″x48″x13″. The PTP-100 type A constants are fabricated from the same material and measure 39″x42″x14″. The type A constants are designed to support loads up to 25,000 lbs. and enable downward travel of up to 4″. Standard load testing was performed to ensure product quality before shipping.

Do you require constant springs for your piping system? Get pricing today!

request-a-quote


6600 lb. load PTP-4 Type C Variable Springs with Riser Clamps

July 16th, 2004 No comments
6600 lb. load PTP-4 Type C Variable Springs with Riser Clamps

6600 lb. load PTP-4 Type C Variable Springs with Riser Clamps

PT&P recently designed and manufactured six, PTP-4-160 type C variable springs with riser clamps for an oil refinery in Texas.  These variable springs are constructed from carbon steel and designed to support loads of 6600 lb. with a total travel of 2″. The clamps are fabricated from A 387 Gr. 22 alloy steel to fit 18″ pipes. Dimensional and fit-up tests were performed on the variable springs and riser clamps prior to shipping.

Do you see a need for variable springs in your current or upcoming project? Get pricing!
request-a-quote


5,800 lb. load Type F Variable Springs

June 18th, 2004 No comments
5,800 lb. load Type F Variable Springs

5,800 lb. load Type F Variable Springs

Piping Technology and Products, Inc. recently designed and fabricated eighteen 1,200 lb to 5,800 lb. load PTP-2 type F size 100 to 150 variable springs for a company in South Korea. These variable springs fabricated from carbon steel are designed for 200°F. They have an overall height of 9.5″ to 11.5″ and are designed for a travel range of 1/8″ upward to 3/16″ downward. Per the customer’s request the variables were coated with a custom paint. To ensure quality, standard load testing was performed on the variables prior to shipping.

Want to learn more about variable springs? Instantly watch a variable spring webinar now!



access-our-webinar-archives



44,000 lb. load Horizontal Upthrust Constant

May 21st, 2004 No comments

44,000 lb. load Horizontal Upthrust Constant

44,000 lb. load Horizontal Upthrust Constant

Piping Technology & Products, Inc. recently fabricated horizontal upthrust constants for loads ranging from 24,000 lb. to 44,000 lb.  These Fig. PTP 200 type U constants are designed for a travel range of 4″ to 4 ½”. They are fabricated from A36 carbon steel with dimensions ranging from 60″x52″ to 80″x52″. To meet customer specified installation heights, angles were added to the base of each constant. Load testing was performed to ensure product quality prior to shipping.

Want to learn more about constant springs? View a past constant webinar today!


access-our-webinar-archives



90,000 lb. Load Big Ton Springs for a Chemical Plant

April 9th, 2004 No comments

90,000 lb. Load Big Ton Springs for a Chemical Plant

90,000 lb. Load Big Ton Springs for a Chemical Plant

90,000 lb. Load Big Ton Springs for a Chemical Plant

Name Plate Indicates Hot/Cold Loads

Piping Technology and Products, Inc. manufactured four 13,500 lb. Big Tons Springs for a chemical plant in Texas. These PTP-500 Big Ton Springs have a load capacity of 60,000 to 90,000 lb. are fabricated from A-36 carbon steel. They are designed for 750°F and a downward travel range of 3/16″ to 1/4″. These 37″ x 31″ x 30″ Big Tons will be used to support certain critical equipment with thermal expansion at the chemical plant. To assure quality, load testing was performed on the big tons prior to shipping.

Do you require big ton springs in your current or future job? Get pricing today!
request-a-quote


950 lb. Load PTP- 6 Type F Variable Springs for an Offshore Oil Rig

March 19th, 2004 No comments
950 lb. Load PTP- 6 Type F Variable Springs for an Offshore Oil Rig

950 lb. Load PTP- 6 Type F Variable Springs for an Offshore Oil Rig

Piping Technology and Products, Inc. recently designed and fabricated two 950 lb. load PTP-6 type F size 90 variable springs for an offshore oil rig.  These variable springs have an overall height of 33 1/2″ and are designed for a travel range of 4″. Each variable consists of an 8 5/8″ dia. casing, a 13″ square base plate, an 8″ load flange and three spring coils with a 7 1/2″ working range. All components are fabricated from carbon steel and are hot-dipped galvanized.

Want to learn more about variable springs? Instantly view a past variable webinar!


access-our-webinar-archives



Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy