Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
Pipe Saddles — The Pipe Supports Blog

Adjustable Pipe Stands Designed for a Crude Oil Terminal in Texas

October 24th, 2016 Comments off

Adjustable Pipe Stands Designed for a Crude Oil Terminal in Texas

Type: Adjustable Pipe Stands / Saddles
Design: 3″ to 25″ Dia. | +/-2″ Adjustment
Material: Carbon Steel with a HDG Finish
Function: Allow adjustment after expansion and contraction

Piping Technology & Products, Inc. designed and fabricated fifty-seven adjustable pipe stands for a Crude Oil Terminal in Texas. All the supports are fabricated from carbon steel with a hot-dipped galvanized finish. They are designed for 3″ to 25″ diameter pipelines with +/- 2″ of adjustment. Each base plate has been pre-drilled to accept anchor bolts provided at the site. The function of the pipe stand is to allow for adjustment of the support after expansion or contraction of the pipeline.

Heavy Duty Pipe Saddles Designed for an Ethane Cracker

October 11th, 2016 Comments off

Heavy Duty Pipe Saddles Designed for an Ethane Cracker

Type: Heavy Duty Pipe Saddles
Design: 60″ Dia. | 23-5/8″ Length | 5-18″ from BOP
Material: Carbon Steel with a HDG Finish
Testing: Visual | Sample Pipe | Dimensional

Piping Technology & Products, Inc. designed and manufactured these heavy duty pipe saddles for the Ethylene Plant Project in Texas. The saddles are fabricated from A36 carbon steel with a hot-dipped galvanized finish and designed to support pipes up to 60″ in diameter. They measure 23-5/8″ in length and 5-1/8″ from BOP. Standard Q.C., visual inspection with a sample pipe and dimensional tests were performed prior to shipment.

Cold Insulated Pipe Saddles with Slide Plates Designed for an Ethane Cracker at a Plant in Texas

August 29th, 2016 Comments off

Cold Insulated Pipe Saddles with Slide Plates Designed for an Ethane Cracker at a Plant in Texas

PT&P designed cold insulated pipe saddles with PTFE slide plates to provide sliding and guiding support for horizontal piping leading to an ethane cracker at a plant in Texas. The project fulfilled an emergency request when the client realized the product was missing at time of installation. The pipe saddles are fabricated from carbon steel with a hot-dipped galvanized finish for pipe sizes ranging from 3″ to 56″. They have a diameter of 40″, height of 23-5/8″, width of 42-1/2″ and 11-7/8″ BOP. Visual inspection and dimensional checks using a section of pipe were completed prior to shipment.

30″ Dia. Adjustable Pipe Saddle Supports Designed for an Oil Refinery

March 10th, 2013 Comments off

30" Dia. Adjustable Pipe Saddle Supports Designed for an Oil Refinery

These custom adjustable pipe saddle supports were designed for an oil refinery in Michigan. They will support 24″ and 30″ diameter pipes and range in height from 40″ to 42″. The pipe saddles can be vertically adjusted by turning the middle section of the seamless pipe and the base plates have been pre-drilled to accept anchor bolts. They are fabricated from carbon steel with a red oxide finish to protect against corrosion and were shipped within two weeks.

Adjustable Pipe Saddle Supports Designed for 12″ to 14″ Dia. Pipe Sizes

December 31st, 2012 Comments off

Adjustable Pipe Saddle Supports Designed for 12" to 14" Dia. Pipe Sizes

These Fig. 46 adjustable pipe saddle supports are designed for pipe sizes 12” to 14” diameter for an oil refinery. They are fabricated from carbon steel and are capable of supporting up to a 4,920 lb. load. A total of twelve supports were fabricated, quality inspected and tested prior to shipment.

36 Custom Designed Pipe Saddles for a Power Plant

September 4th, 2012 Comments off

Thirty-six custom designed pipe saddles were created for a power plant in Mississippi. These 20″ W x 72″ L x 30″ H saddles were made with carbon steel with PTFE slide plates. These pipe saddles were designed to support a load of 55,000 lb. and will be applied to fluid bed duct supports.

Clamp-On Pipe Shoe Assemblies Were Custom Designed For A Gold Mine Project

April 30th, 2012 Comments off

Clamp-On Pipe Shoe Assemblies Were Custom Designed For A Gold Mine Project

These fabricated clamp-on pipe shoe assemblies were custom designed for a gold mine project in the Dominican Republic. They are composed of a clamp-on pipe shoe subassembly combined with a carbon steel pipe extension. A total of nineteen pipe shoes were fabricated for 3″, 4″ and 6″ diameter pipes. The extensions were designed at various heights to position the pipe line at the correct elevation for a sloping line. When a design includes a closed off section, PT&P’s standard is to incorporated vent holes in order to prevent moisture build-up. They are painted with a two-coat paint system to protect against corrosion and include stainless steel tags to easily identify the product code.

78 Heavy Duty Pipe Saddles for Insulated Ductile Iron Pipelines

February 25th, 2009 No comments
78 Heavy Duty Pipe Saddles for Insulated Ductile Iron Pipelines

78 Heavy Duty Pipe Saddles for Insulated Ductile Iron Pipelines

78 Heavy Duty Pipe Saddles for Insulated Ductile Iron Pipelines

Side View of Pipe Saddles

PT&P custom designed seventy-eight figure 2000 heavy duty pipe saddles for two 24″ insulated ductile iron pipelines. The two pipelines are routed beneath a 650′ bridge crossing over a river in upper New York State. The insulation is 3″ thick with high density polyethylene jacketing. Axial movements due to expansion can approach 3″. In order for the jacketing to avoid being damaged when displacements occur, the saddles have been lined with polished stainless steel.

Would you like to order similar pipe saddles for your current or future job? Get pricing!
request-a-quote


60" Adjustable Pipe Stands for an LNG Plant

November 7th, 2007 No comments

 

60" Adjustable Pipe Stands for an LNG Plant

60" Adjustable Pipe Stands for an LNG Plant

The stands were completed with a hot-dipped galvanize finish. They were also designed with a neoprene lining in the saddle to prevent metal to metal contact in the field. The function of the pipe stand is to allow for adjustment of the support after expansion or contraction of the pipeline. The simplicity of the design allows for easy installation and maintenance of the support.

Do you see a need for adjustable pipe stands in your current or upcoming project? Get pricing today!
request-a-quote


42" Large Bore Pipe Saddles

June 13th, 2007 No comments
42" Large Bore Pipe Saddles

42" Large Bore Pipe Saddles

42" Large Bore Pipe Saddles

42" Large Bore Pipe Saddles

42" Large Bore Pipe Saddles

42" Large Bore Pipe Saddles

PT&P fabricated 42″ diameter large bore pipe saddles. All pipe saddles are designed to be used on flare lines for a crude expansion project. They are fabricated from A-36 carbon steel and hot dipped galvanized. Sizes range from 16″ – 48″ in diameter and 6″ – 15″ in height.

Do you require large bore pipe saddles in your current project? Get pricing today!
request-a-quote


Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy