Piping Technology and Products Logo

Piping Technology & Products

Loading
 
  Experienced Manufacturer of Pipe Supports since 1978
Call Us: (713) 731-0030 Toll-Free: (800) 787-5914   Se habla español
 
Pressure Vessel — The Pipe Supports Blog

42″ Dia. Stainless Steel Storage Tank

July 21st, 2013 Comments off

42" Dia. Stainless Steel Storage Tank
Sweco Fab. designed and fabricated storage tanks from 1/4″ thick ASTM A240 grade 304 stainless steel. The tanks are 42″ in diameter, 72″ in overall length and 39-7/8″ in height. The legs are fabricated from SA36 carbon steel. They are designed for 1 PSIG and ambient temperatures. The storage tanks were hydro tested and leak tested for 8 hours prior to shipment.

Ladders and Pressure Vessel Platforms for a Delayed Coker Unit Stripper Tower in California

October 3rd, 2011 No comments

Ladders and Platforms to be installed on a 90 foot tall pressure vessel

The ladders and platforms were designed to be installed on a 90′ tall pressure vessel. The ladders were fabricated from carbon steel and ranged in size from 5′ to 38′ in length. The vessel platforms were also fabricated from carbon steel and measure up to 16′-6″ in diameter.

Do you require ladders or platforms for a vessel or tank? Let us serve your needs today!

request-a-quote

60" Diameter ASME Pressure Vessel for a Chemical Plant in Beaumont

December 27th, 2010 No comments
Submarine Drum Vessel for a Chemical Plant in Beaumont

Submarine Drum Vessel

  • ASME pressure vessel
  • 60″ diameter , 176″ seam to seam
  • SA 516-70 shell
  • SA 105 nozzles
  • Design conditions: 75 PSIG @ 400°F
  • Corrosion allowance: 1/4″

Do you have an upcoming requirement for a tank or ASME vessel? Get pricing today!
request-a-quote

48" Diameter High Pressure Knock-out Drum for a Chemical Company

August 25th, 2010 No comments

48" Diameter High Pressure Knock-out Drum for a Chemical Company

This high pressure knock-out drum has a 2.5″ thick shell fabricated from ASTM SA516 Grade 70, and a SA105 and SA350 carbon steel flange. The drum has a 48″ diameter, a total length of 15’8″ and weighs over 23,000 lb. It underwent a hydro-test and design test per ASME section VIII-1 “U” stamp vessel prior to shipment.

Do you require a vessel or knock-out drum for your project? Get pricing today!
request-a-quote

48" Carbon Steel Pressure Vessel

June 5th, 2008 No comments
48" Carbon Steel Pressure Vessel

48" Carbon Steel Pressure Vessel

Pressure Vessel
- Diameter: 48″ O.D.
- Capacity: 1,100 Gallons
- Material Fabricated From: Carbon Steel
- Design Temperature & Pressure: 285 PSIG at 100ºF
- Testing: Hydro-Tested and held for 1/2 hour at 428 PSIG

Do you have a need for a pressure vessel? Get pricing on a vessel today!

request-a-quote

7 Foot Long Pressure Vessel for a Chemical Plant

May 14th, 2008 No comments
7 Foot Long Pressure Vessel for a Chemical Plant

7 Foot Long Pressure Vessel for a Chemical Plant

This pressure vessel measures 84″ in length and is fabricated entirely of SA516-70 carbon steel. It is designed for low temperature environments and has a design pressure of 117 PSIG at 500ºF. A hydrostatic test was completed at 205 PSIG prior to shipment.

Do you have a requirement for a pressure vessel in your plant? Get pricing today!
request-a-quote

Pressure Vessel in an Emergency Situation for a Gas Company in Florida

November 8th, 2006 No comments
Pressure Vessel in an Emergency Situation for a Gas Company in Florida

Pressure Vessel in an Emergency Situation for a Gas Company in Florida

- 24″ Diameter Horizontal Pressure Vessel
- Repaired Welds on Flange & Shell
- 12 hr. Turn Around Time
- Hydro-Tested at 1500 PSI
- Held for 1 hr. at 80˚F
- 100% X-Ray

Do you require a pressure vessel or tank for your application? Get pricing today!

request-a-quote


Pressure Vessel for a Chemical Company

April 19th, 2006 No comments
Pressure Vessel for a Chemical Company

Pressure Vessel for a Chemical Company

 

Pressure Vessel for a Chemical Company

Top of Pressure Vessel

This pressure vessel is manufactured from carbon steel SA516-70. Its diameter is 48 by 96 tangent to tangent and weighs 2,140 lbs. The pressure vessel is used as a process feed tank and was painted for rust resistance. In addition, the vessel was designed for pressures at 15 PSIG and temperatures at 86F. Hydro-tests were conducted at 20 PSIG and x-ray tests were completed to ensure quality performance.

Do you require a tank or vessel for your current job? Get pricing now!
request-a-quote


2800 lb. Pressure Vessel for an Oil Refinery

July 9th, 2004 No comments
2800 lb. Pressure Vessel for an Oil Refinery

2800 lb. Pressure Vessel for an Oil Refinery

2800 lb. Pressure Vessel for an Oil Refinery

Close-up of the Explosion Proof Electrical Junction Box

Sweco Fab, Inc. recently designed and fabricated a 2800 lb. pressure vessel for an oil refining company in the United Arab Emirates. This pressure vessel will be used as a dust collector to filter a process fluid for an unleaded gasoline project. The vessel, 30″ in diameter and 14′-11″ OAL, is designed for 150 PSIG and 248°F. Spot radiography, dye-penetrant, and hydrostatic tests were implemented to ensure product quality.

Do you have a requirement for a vessel or tank? Get pricing today!
request-a-quote


108" I.D. x 144" T-T Vessel

August 16th, 2001 No comments
108" I.D. x 144" T-T Vessel

108" I.D. x 144" T-T Vessel

Sweco Fab, Inc., the ASME code fabrication shop for Piping Technology & Products, Inc., specially designed and fabricated a 108″ I.D. x 144″ T-T vessel for the Texas A&M University. The “Aggie Vessel” will be used for special research project at the university. A 24″ T-bolt closure was used for access to the vessel and two stiffner rings were installed to withstand vacuum application. Unique internal design was also applied to facilitate special equipment installation. Helium leak test at 1×10-6 cc/sec will be performed to detect leakage.

Are you in need of a vesssel? Request a quote today!

request-a-quote


Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
 Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors

Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 info@pipingtech.com

©2017 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy