Variable Spring Supports Designed for a Highly Corrosive Environment in Peru

July 1, 2019

 

Variable Spring Supports Designed For A Highly Corrosive Environment In Peru

Type: Variable Spring Supports w/ PTFE Slide Plates
Size: PTP-4 | 9.5″ – 11.5″ Height
Design: 1/8″ Upward & 3/16″ Downward Travel
Material: HDG Carbon Steel | Gloss Aliphatic Polyurethane Topcoat | PTFE, 25% Glass Filled Slide Plates
Testing: Standard Load Testing & Q.C. Inspection

Piping Technology & Products, Inc. recently designed and fabricated F-type variable spring supports for a plant in Peru. The variables are fabricated from carbon steel, hot-dipped galvanized and a gloss aliphatic polyurethane topcoat was applied for corrosion protection. PTFE, 25% glass filled, slide plates are bonded to the top of the load flange to reduce the friction caused by lateral movement. The variables range from 9.5″ to 11.5″ in height and are designed for a travel range of 1/8″ upward to 3/16″ downward. To ensure quality, standard load testing was performed prior to shipping.

Top